Please keep in mind the type of water you are using (hard, soft or well water) may affect these ratios and you may need to adjust up or down to achieve the best result.
RAM diluted 2 oz. to 30 oz. of water is a General All Purpose Cleaning Mixture.
Spray your counter-tops, furniture, paneling, wood-work, walls, upholstery, appliances, light fixtures, ceramics, stainless steel, patio and pool furniture, Venetian blinds and any metal surface. Spray mist and wipe dry.
RAM may be used full strength for tough problems such as rust, road tar, driveway cleaning, de-greasing car engines, glue and soap buildup. Apply to area to be cleaned and let stand for up to five minutes, then wipe off with clean cloth.
On any metal surface such as motorcycles, house siding, autos and trucks, etc… DO NOT use full strength in hot sun or while surface is hot, let it cool down, spray with cold water hose and then apply RAM, rinse with hose again.
RAM cleans and protects glass & mirrors in a single action. RAM also helps resist 75-80% of natural hand oils of unwanted fingerprints.
1. Apply RAM diluted 1 oz. to 1 gallon (128 oz.), or 1/4 oz. to 1 quart (32 oz.) water with spray mist or cloth.
2. Use clean, dry cloth to buff glass completely dry.
Note: This mixture can also be used for windshields, bathroom mirrors, motorcycle guards, swimming masks or goggles, eye glasses, TV screens, ceiling fixtures, etc…
RAM diluted 2 oz. to 30 oz. water is an excellent cleaner of all plastic products, for porous and textured surfaces. Use a soft brush for problem areas.
NOTE: Always test for colorfastness when using RAM on carpets, upholstery, fabrics, and spot cleaning.
RAM can be used to clean an entire room of carpet or individual stains or spots on carpet.
Some of the common carpet stains RAM can remove are: grease, wine, liquor, soda, pet stains, gum, oil, coffee, glue, paint, grape juice, candle wax, some inks, vomit, water stains and hair dye.
TO REMOVE STAINS FROM CARPETING
1. Spray a solution of 2 parts RAM to 30 parts water onto stain; let it stand for 20 seconds.
2. Cover with towel; step on it with a twisting motion to soak up stain.
3. Rub dry with second towel; repeat if necessary until stain is removed.
NOTE: Always test for colorfastness when using RAM on carpets, upholstery, fabrics, and spot cleaning.
1. Vacuum carpet.
2. Dilute RAM 2 parts to 10 parts water for badly soiled carpet. For regular carpet cleaning, use 1 part RAM to 15 parts water.
3. Apply with soft bristle brush or sponge mop to loosen soil.
4. Wipe badly soiled areas with clean towel if necessary.
5. Vacuum.
NOTE: Always test for colorfastness when using RAM on carpets, upholstery, fabrics, and spot cleaning.
(Using a machine with rotary brushes is best)
(Diamonds, Gold, Silver)
For the ultimate cleaning and care of fine jewelry, RAM is a must. Dilute 2 oz. RAM to 10 oz. water in a bowl or jar. Immerse jewelry for five minutes. Remove and scrub with old toothbrush. Rinse with water and buff dry with cotton cloth. The shine and sparkle will amaze you.
RAM will remove sun tan lotions and body oils from upper walls of pool interior.
Dilute RAM 2 oz. to 30 oz. water, spray on sponge and rub walls.
If cleaning before painting your pool, RAM will remove dirt and grime from the pool surface and is an excellent pre-paint bonder.
Dilute RAM 2 oz. to 30 oz. of water, stronger if desired. Scrub surface with brush and hose off.
Note: Always test for colorfastness when using RAM on carpets, upholstery, fabrics and spot cleaning.
1. Vacuum area to be cleaned.
2. Dilute RAM 2 oz. to 30 oz. water.
3. Spray mist RAM cleaner on surface, let stand for one minute and wipe or pat dry with clean cloth. Repeat as necessary.
1. Remove blinds.
2. Hang on clothes line or lay on table or bench.
3. Dilute RAM 2 oz. to 30 oz. water.
4. Spray mist starting at top proceeding to bottom.
5. Let stand for five minutes.
6. Spray off with water hose and repeat as necessary.
7. Let dry and hang back up.
1. Dilute RAM 2 oz. to 30 oz. water. If heavily soiled, 2 oz. RAM to 10 oz. water.
2. Spray mist RAM over area to be cleaned. (Work in a small area.)
3. Scrub top with brush giving RAM time to break up soil and mildew.
4. Rinse with clean water.
To boost cleaning power of regular detergents (powder or liquid) on grass stained clothes, work clothes, diapers, grease spots or heavily soiled clothes, add 2 oz. RAM with your regular wash.
For tough stains, dilute RAM 2 parts to 10 parts water and moisten problem area, rub in and wait a few minutes, put in laundry as usual.
1. Heat up to 110 degrees.
2. Dilute RAM 2 parts to 10 parts water. Apply moderately.
3. Leave on for five minutes.
4. Let oven or grill cool completely and wipe thoroughly using clean damp cloth. Use Scotch Brite scour pad if needed.
5. Repeat if necessary.
1. Dilute RAM 2 oz. to 10 oz. water.
2. Apply with cloth or sponge, working soil loose.
3. Rinse thoroughly with pressure hose. Buff surface dry. (Do not clean metal in direct sun or when metal is hot.)
(Do not use on asphalt)
Dilute RAM 2 oz. to 30 oz. water.
If heavily soiled, dilute RAM 2 oz. to 10 oz. water.
Use a strong bristle brush. You may have to repeat if concrete is rough and grease has worked into rough area. Allow five to ten minutes to break up soil and hose off. Repeat if necessary.
If fresh oil has absorbed into concrete it may leave a wet look although all surface oil is removed. Let dry a few days in hot sun and repeat.
If concrete has totally absorbed soil, you will not be able to remove the stain.
For mobile homes, aluminum siding, gutters, camping trailers, RV’s and semi-tractor washing.
1. Dilute RAM 2 oz. to 30 oz. water. (If oxidation, mildew, grease, oil or diesel oil is present dilute 1 oz. to 10 oz. water.)
2. Dip sponge (sponge mop for higher areas) into solution and wipe clean.
3. Spray mist with hose and let dry or towel buff.
You may want to spray with liquid wax after this procedure to bring a shine.
Cleans all washable floors, including no-wax floors, linoleum, vinyl, ceramic tile, and all smooth painted and unpainted surfaces.
1. Dilute RAM 2 oz. to 30 oz. water or 8 oz. per gallon in warm water.
2. Pre-soak heavily stained area and allow five minutes to soak.
3. Mop floor and allow to dry.
1. Dilute RAM 2 oz. to 10 oz. water.
2. Sponge mop floor.
3. Let stand three to four minutes.
4. Use Scotch Brite scour pad if done by hand or strip with abrasive buffer.
5. Mop with 2 oz. RAM to 30 oz. water and let dry.
A dirty condenser coil is a major source of compressor failure. RAM can help you avoid this costly procedure.
1. Turn power switch off.
2. Dilute RAM 2 oz. to 10 oz. water.
3. Use forceful spray and spray into coil, starting at top moving to bottom.
4. Let stand five minutes.
5. With garden hose, spray coil off.
6. Turn power back on, BUT WAIT 30 MINUTES TO START UNIT.
1. Dilute RAM 1 part to 5 parts water.
2. Spray on engine or engine parts when cool.
3. Let stand five minutes for RAM to break up grease, oil and soil.
4. Rinse with pressure hose.
Stay in the RAM loop and you’ll be the first to receive information about special offers. Of course, we never sell your information to any third parties & we promise not to email you unless we have something cool to share! Subscribe to our newsletter here:
© Copyright 2025. Ram Cleaner All Rights Reserved.
